Product Category

QL-8M Lathe

QL-8M Lathe
  • Specifications
  • Standard Accessories
  • Optional Accessories

Specification:

ITEM
QL-8M
Standard
C axis
Capacity Swing over bed (mm) Ø560
Swing over saddle (mm) Ø420
Distance between center (mm) 750
Max. machining dia. (mm) Ø320 Ø300
Max. machining length (mm) 570
Slant angle of bed 30°
Travels X-axis (mm) 190(160+30) 190(150+40)
Z-axis (mm) 610
Spindle Spindle speeds (rpm) 6000 (A2-5);OPT: 4500(A2-6);
Spindle nose A2-5; OPT:A2-6
Spindle bore dia. (mm) Ø55; OPT:Ø62, Ø76
Front bearing inner dia. (mm) Ø100
Draw bar (mm) Ø45; OPT: Ø52, Ø65
Chuck Chuck diameter (inch) 6"; OPT:8"
Turret Turret Type Hydraulic;OPT:Servo Live tooling
Stations 10 12
Model LS-160A*10T LS-160SP*12T
Square tool shank (mm) 25x25 20x20
Boring bar shank diameter (mm) Ø40 Ø32
Indexing time (sec) (0~180) 2 0.85
Live-tooling Spindle speeds (rpm)   5000
Feedrates Rapid traverse (M/min) X:30, Z:30
Tailstock Type manual OPT:programmable
Quill diameter (mm) Ø65
Quill bore taper MT-4
Quill travel (mm) 50
Motors Main spindle (kW) β8 7.5/11; OPT: β12, α8
Live-tool (kW)   α2/10000
X/Z-axis servo motor (kW) X:β8/3000 1.2, Z:β8/3000 1.2;OPT: β12, α8
Hydraulic oil pump (kW) 0.745
Chip conveyor (kW) 0.2
Coolant pump (kW) 0.96
Accuracy Positioning ±0.004
Repeatability ±0.003
Power Fanuc (KVA) 380-415/220V 15KVA
Size Height (mm) 1844
Floor space (L x W) (mm) 3181X2053
Packing (w/conveyor) (mm) 4040x2280x2180
Net weight (w/conveyor) (kgs) 3660
Gross weight (w/conveyor) (kgs) 4010

Standard Accessories

  • FANUC 0i-Mate TD Controller
  • Spindle Speed:6000 rpm
  • Spindle Motor:7.5 / 11 Kw
  • 6" Hydraulic Chuck
  • Hydraulic 8-Tool Turret
  • 4 Wedge Type Tool Clamps (for OD Tools)
  • 4 Boring Bar Holders
  • Taper Sleeve (MT No. 1 & MT No.2 ) x O.D. 20
  • Boring Bar Bushings (Ø8,10,12,16,20,25) x O.D. 20
  • Programmable Tailstock with MT4 Quill
  • Coolant System
  • Leveling Bolts and Pads
  • Automatic Lubrication System
  • Work Lamp
  • End of Program Light
  • Tool Kit
  • Chain type chip conveyor + chip cart
  • One soft and one hard jaw
  • Operation & Maintenance Manual
  • Programming Manual
  • Parts List

Optional Accessories

  • FANUC 0i-TD
  • Siemens Controller
  • Mitsubishi Controller
  • 8" Hydraulic Chuck (KITAGAWA)
  • Hydraulic 10 Tool Turret
  • Collet Chuck
  • Bar Feeder
  • Bar feeder Interface
  • VDI turret (10 or 12 tools)
  • Live tooling + C-axis
  • Parts Catcher
  • Oil Skimmer
  • Foot Pedal for Tailstock
  • Automatic Door
  • Oil Mist Collector
  • Manual Tool Setter
  • Automatic Tool Setter
  • Transformer
  • CE
  • Stabilizer
  • Air cooler
  • Robot arm